FTA Receiver

The growing appetite for more diverse TV channels has given rise to the FTA receivers. If you’re still unsure of what it is, here are the fundamental things you need to know about it.

How the Devices Work

These gadgets are used to get data emanating from the FTA satellites. Unlike other systems, the info stored in the satellite is not encrypted. Many formats are used, but the most popular is MPEG – 2. Obviously, getting the data is not enough. The device must read the MPEG format correctly. For this reason, the apparatus makes use of a video codec that can read MPEG – 2.

Relaying the Information

Once the FTA receivers get the data, it’s relayed back. Usually it is relayed through UHF or VHF. These channels are free. If there are no problems with the transmission, the programs will be broadcasted.

Setting it Up

To get it to work, you need to have a receiver. In addition a satellite dish is needed. There are many types around but whatever you get make sure that it’s the C or K band. It’s also important that it be DTV compatible too. Those terms can be explained at the store you’ll buy it from.

You should look for the antenna motor and the LNBF. These parts aren’t actually needed for the devices to work. But with these the FTA receivers will get more channels and may improve reception.

Assembling the Pieces

The process is described in the manual for the dish and receivers. Usually however, you must have a coaxial cable. Use this to connect the receiver and the dish. The next step is to set the dish direction. You need to climb the roof to set it right. If you’ve done this before, it shouldn’t be a problem.

Tips and Warnings

  • Setting these things are not that difficult. It’s important though that you do some research first. The channels you get from the FTA receivers will depend on your location too. Although the channels themselves are free, this is only for the majority. Some of them actually charge fees or air commercials.
  • It’s also important to keep yourself updated on the technology. The video encoding may change. It’s also a good idea to keep track of what good channels are available in your area.
  • Also some of the channels that are free in some areas are pay services in others. You might also have to make several choices. Check with the user guide. When it comes to setting up the antenna, you should get professional help if you don’t know how to organize it.
  • If you are going to set up the antenna yourself, take care not to fall when you get on the roof. It’s better if you have someone with you while you get along with the task. Owing to the nature of the task, it’s best to do it before dark.
  • The more you know about FTA receivers, the easier it will be to set it up. Once you get it done, you’ll get access to more TV channels.