Free To Air Channels

The free to air channels are those which you can watch with the right receivers and equipment. Before you can get them to work, you need to know something about FTA receivers.

FTA Receivers

These are the utilities that relay the signals back to your TV. It works in the following way. The FTA satellites store the data. In turn the receivers are able to tune in and relay the data signal. These are not encrypted like other satellites. Instead they use a video codec, usually MPEG 2. Once the information has been detected, the receiver will transmit the signal.

Channel Availability

The free to air channels are usually shown on the VHF or UHF band. This becomes possible only after the MPEG 2 has been decoded. The number of channels that are available on the UHF and the VHF channels now number in the thousands. However their availability depends on your location too. In addition the channels may also come with commercials.

It needs to be stressed that even though they are free on the UHF and VHF band, it doesn’t automatically mean they can be shown. Geographical location still plays a part.

Getting the Right Equipment

There are several things that you need to purchase before getting the free to air channels. The most important one will be the FTA receiver. You can select from Pansat, Conaxsat and many others.

There may be other brand names in your local area. Of course the satellite dish is required. The specifications for each one differ. Be sure that yours is set up correctly for your area. Also check for their DTV compliance.

This will make it easy to set everything up. Other things to look for are the LBNF and the C and K bands. These components will allow you to get more viewing options. The antenna motor is also necessary.

Setting Everything Up

Start by getting all the hardware mentioned. If you have any questions about free to air channels, you can always make inquiries at the electronics store. Before assembling, read over any user guides or manuals. You’ll want to make sure you are handling it correctly.

Start by getting a coaxial cable. Connect the dish, the FTA receiver and the TV set. Once it has been set up, it’s time to orient the dish. This needs to be set up at the roof. There is risk involved here so be careful. To be on the safe side you can just hire a licensed technician to do it for you.

If you want to do it yourself, be careful. Do it only in the daytime and when the weather is agreeable.

If you are having trouble getting it to work, you can always go to the Web. You can visit FTA vendor sites and other areas of interest. This will allow you to make the most out of your TV viewing and avoid making mistakes.

The free to air channels are there for the taking. You just need the right equipment, and you’ll be able to enjoy it.